Metabo HPT wired paddle switch angle grinder

Wired Metabo HPT grinders are characterized by less maintenance and more sustainable performance

Metabo HPT has launched two wired 12A angle grinders to get more done at work with less downtime. The Metabo HPT 4-1 / 2 ″ Paddle Switch Disc Grinder and the 5 ″ Paddle Switch Disc Grinder both supply AC-powered power that is not only lost due to an extra long extension cable. In addition, with the addition of brushless motors, both models eliminate the maintenance associated with armatures and carbon brushes.

The joys of brushless motors are no stranger to us. They are more efficient, perform better, and extend the life of the tool with little to no downtime due to maintenance. And Metabo HPT has added this significant upgrade to the wired paddle switch angle grinder.

With brushless motors, these angle grinders eliminate the need to replace carbon brushes or problems resulting from the motor armature burning through. As a result, you will experience less service-related downtime.

In addition, the Metabo HPT wired angle grinders have electronic controls that compensate for performance losses due to voltage drops. Metabo HPT designed them both to be compatible with a generator with an inverter circuit that cleans up and modulates the current before the motor uses this power. This provides you with stable, stable operation and reduces the chance of damaging the internal circuits of the mills.

Metabo HPT sees the G12BYEQ and G13BYEQ angle grinders as the ideal grinding solution for mobile craft professionals who are on the construction site without a permanent power source. Both models have brushless 12 A motors with high torque and a maximum output of 1,600 watts. Both show an idle speed of 10,000 rpm and weigh only 4.6 lbs.


Other properties

  • Soft start reduces the load noticeable when starting
  • Electric brake stops the bike in seconds
  • Ambidextrous side handles can be screwed into either the right or left side of the tool
  • The kickback reduction shuts down the power when the wheel locks and protects both you and the tool’s gears
  • The zero-voltage restart protection protects the mills from restarting if the power is temporarily interrupted during operation
  • Fine-meshed dust filters prevent dust particles from entering the motor housing
  • Locking lever on the paddle switch increases safety

Pricing

You can purchase one of the wired Metabo HPT paddle switch grinders from most major retailers. You can purchase the G12BYEQ 4-1 / 2 “angle grinder for $ 149, while the G13BYEQ 5” model retails for $ 159. Both models include a filter kit, a side handle, a wrench and a hex wrench. Both also include a 1 year warranty.

Metabo HPT G12BYEQ angle grinder

  • Ampere: 12A
  • Wheel diameter: 4-1 / 2 inches.
  • Switch Type: Lock-Off Paddle Switch
  • Max. Wattage: 1,600 W
  • Idle speed: 10,000 rpm
  • Spindle thread: 5/8 inch 11-UNC
  • Spindle lock: Yes
  • Length: 12-11 / 64 inches.
  • Weight: 4.6 pounds.
  • 1 year warranty
  • Price: $ 149

Metabo HPT G13BYEQ angle grinder

  • Ampere: 12A
  • Wheel diameter: 5 inches
  • Switch Type: Lock-Off Paddle Switch
  • Max. Wattage: 1,600 W
  • Idle speed: 10,000 rpm
  • Spindle thread: 5/8 inch 11-UNC
  • Spindle lock: Yes
  • Length: 12-11 / 64 inches.
  • Weight: 4.6 pounds.
  • 1 year warranty
  • Price: $ 159

Comments are closed.